Plumbing in a New Build

This article was written as a guest post from Just Loft Conversion

Image result for new build home plumbing

Plumbing related works on the easy idea of “drinking water in — drinking water out.” In a new home, the domestic plumbing system features three main components, the resource system, the drainage system and the equipment/fixture set. Generally in most communities, to be able to install domestic plumbing, you must be considered a qualified plumber or you must work under a qualified plumber who approves and oversees your projects says Felipe Rosario from Just Loft Conversions. Local rules determine standard domestic plumbing procedures, but a new build home’s fixture location, tube routing diagram and tube size will depend on the home’s specific layout.

Installation Timetable

Sewer accommodation stubs are place before pouring the concrete base, but the almost all the domestic plumbing occurs later. The rough-in plumbing phase, which occurs with the wiring installation phase, takes place following the framing is complete, but before hanging drywall. This is the right time to install main drains in floors and hook up them to the stack. Rough-in drain fixtures set up for sinks and tubs now. That is also enough time to set up water supply pipes or tubing and set toilet flanges.
Plumbing Fixtures
Because they’re often too big to create once surfaces and doorways are framed, tubs and tub/bathtub devices are usually placed before framing the surfaces. Since a total lot of construction has yet to occur, cover these fixtures with cardboard or even old blankets or rugs to safeguard them from scratches. Set and hook up commodes and sinks last, after finishing the walls and laying the flooring.

Water Resource System

The primary pressurized drinking water source range gets into the home below frost brand, splits into two lines then; one supplies cool water and the other connects to the warm water heater. After that, both lines source hot and cool water to each fixture or device. Some homes have a water supply manifold system featuring a huge panel with red valves using one side and blue valves on the other hand. Each valve manages a person chilly or hot pipe that provides normal water to a fixture. Utilizing a manifold system helps it be simple to shut down the way to obtain water to 1 fixture without shutting off water supply to the complete house says Felipe Rosario from Just Loft Conversions.

Drainage Pipes

Image result for drainage pipes

A primary vent-and-soil stack, which is normally 4 inches wide in diameter, works from under the surface floor to above the roofline vertically. Waste drains hook up to the stack, directing waste downward to the key sewer drain, which in turn exits the house below frost line and ties in to the municipal sewer system or runs to an individual septic system.

Vent Pipes

Image result for vent pipes

Without a regular way to obtain air, water hair can develop in drainpipes, creating clogs. All drains require venting, but an individual vent, usually installed behind a kitchen sink, can serve additional appliances and fixtures that hook up within 10 feet of a common drain line. Vent pipes, which can be 2 inches in diameter, hook up to the vent-and-soil stack in the attic. Whenever a fixture sits too much from the vent, it needs yet another vent tube, which attaches to the stack or exits the roofing separately, with regards to the home’s layout according to Just Loft Conversions.


A drain snare is a U-shaped tube that links to underneath of a kitchen sink, tub or shower drain. A trap retains a tiny amount of water that prevents smelly sewer gasses from burning in to the house. All domestic plumbing accessories require drain traps except the commode, which possesses an internal snare in its platform.

How to Find a Local Plumber in Solihull

No Comments


We’ve all heard the horror stories about a cowboy plumber that spends 10 minutes replacing a tap and the next 45 minutes texting his girlfriend before handing over an invoice charging well over the odds before riding off into the sunset like John Wayne.

By no means are all plumbers cowboys. In fact its fair to say that the majority of plumbers most definitely aren’t. But you know the saying…one bad apple in the cart. It really doesn’t take much to tarnish the reputation of the entire plumbing industry.

If you want know how to find a good plumbing service then read the following guide to finding a reputable plumber.

Follow these steps

1. Recommendations and referrals
2. Make sure that their plumbers are registered and properly licensed
3. Check how long they have been in business
4. Make sure they are well insured
5. Ask about guarantees
1. Recommendations and referrals
Ask friends, family members and neighbors for recommendations to see if they have any suggestions on a good local plumber. You’ll be surprised at just how often a plumber is required so someone might be able to offer up a name or telephone number that you can call. If you’ve had a good experience with another company or tradesman in the past ask them if they can recommend anyone.

Referrals are the best way to find a reputable and trustworthy plumber to use. It’s much better than using opening the yellow pages and choosing a plumber at random. But not everyone knows someone that can recommend a reputable plumbing service so you may have to find one for yourself. If you can’t find anyone that can offer a recommendation you’ll probably need to find some time to do a little research in order to safeguard yourself – providing your plumbing emergency hasn’t left you wading through a flooded kitchen that needs fixing fast.

“The internet is the perfect resource for finding information that can help you find a qualified and professional local plumber with a good reputation” says  Henry Row from A1 Water . Your first port of call should be a visit the plumber or plumbing company website to find out more about them and the type of plumbing and heating services they offer.

Image result for plumber

2. Make sure that the plumber is registered
Depending on the type of work that’s being carried out your plumber should be a registered with certain organisations such as CIPHE, Gas Safe Register.

These bodies ensure that members are competent and properly trained with the necessary skills and commitment to high standards so that they can perform the type of work your are employing them for.

Approved trader schemes
It’s essential to do a little research when it comes to confirming if the logo’s you are seeing on a plumbing company website are actually legitimate. Anyone can claim to be approved or qualified but it’s not sensible to simply take their word for it. Investigate a little further and find out if your plumber is being honest. A reputable plumbing company should provide you with links on their website to lead to their listing page on the schemes website. If they don’t then contact the trade body to find out if they are being honest and that they are really registered.

TrustMark is a not-for-profit organisation thats backed by the UK government. According to the trust mark website “the best way to protect yourself from rogue traders and cowboy builders is to use a Trustmark registered firm.” TrustMark registered firms are checked and monitored against recognised British, international or industry standards. Companies that display the TrustMark logo are subject to regular on-site inspections to ensure that technical skills are at the required level. The company also has to be financially sound and their financial position is checked when they first join the scheme. As a TrustMark registered company we work to a code of practice to give you greater confidence and protection.

3. Check how long they have been in business
It’s always a good idea to check how long the company has been around. It’s fair to say that reputable companies tend to stick around whereas disreputable firms are more likely to fade away.

It’s also a good idea to find out if they have a premises. This can be a good indication that they are less likely to go AWOL part way through a job.

4. Make sure they are well insured
Always ask about insurance and how it affects the type of work that the company will be carrying out in your property. It’s important that your chosen plumber carry adequate liability insurance for work related damages.

5. Ask about guarantees
Find out about the guarantees that are offered. Plumbers with belief in their own performance tend to offer guarantees.

We offer a 12 month guarantee on the work that we do and parts that we replace. Additionally, we are fully insured up to the value of £10 million.